Table 58 igmp – ZyXEL Communications GS-2724 User Manual
Page 172
Chapter 25 IGMP
GS-2724 User’s Guide
172
The following table describes the labels in this screen.
Table 58 IGMP
LABEL
DESCRIPTION
Active
Select this check box to enable IGMP on the Switch.
Note: You cannot enable both IGMP snooping and IGMP at the same
time. Refer to the section on IGMP snooping.
Index
This field displays an index number of an entry.
Network
This field displays the IP domain configured on the Switch.
Refer to
for more information on configuring IP domains.
Version
Select an IGMP version from the drop-down list box. Choices are IGMP-v1, IGMP-v2,
IGMP-v3 and None.
Apply
Click Apply to save your changes to the Switch’s run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Cancel
Click Cancel to begin configuring the fields again.