ZyXEL Communications GS-2724 - Manual (Page 238)

Chapter 38 Introducing Commands
GS-2724 User’s Guide
238
running-config
interface port-
channel <port>
<port-list> [bandwidth-limit
....] Copies the specified attributes
from one port to other ports.
13
tftp config <index>
<ip> <remote-
file>
Restores configuration with the
specified filename from the
specified TFTP server to the
specified configuration file on the
router.
13
flash <ip>
<remote-file> Restores firmware via TFTP. 13
disable Exits Enable (or privileged) mode. 13
enable Accesses Enable (or privileged)
mode.
13
erase running-config Resets to the factory default
settings.
13
interface port-
channel <port-
list> [bandwidth-
limit...] Resets to the factory default
settings on a per port basis and
optionally on a per feature
configuration basis.
13
exit Exits Enable (or privileged) mode. 13
help Displays help information. 13
history Displays a list of command(s) that
you have previously executed.
13
igmp-flush Removes all IGMP information. 13
kick tcp <Session ID> Disconnects the specified TCP
session.
13
logout Exits Enable (or privileged) mode. 13
mac-flush Clears the MAC address table. 13
<port-num> Removes all learned MAC
address on the specified port(s).
13
no logging Disables syslog logging. 13
ping
<IP|host-
name> Sends Ping request to an Ethernet
device.
13
[vlan <vlan-
id>][..] Sends Ping request to an Ethernet
device in the specified VLAN(s).
13
reload config <index> Restarts the system and use the
specified configuration file.
13
show classifier Displays all classifier related
information.
13
[name] Displays the specified classifier
related information.
13
cluster Displays cluster management
status.
13
Table 89 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION
PRIVILEG
E