Zanussi ZKH 2145 User Manual

Page 18

Advertising
background image

Replace the filter into the pump by inserting it correctly

into the special guides. Screw the pump cover firmly by

turning it clockwise.

Replace the emergency

emptying cap into the

pump cover and fix it firm-

ly.

Close the pump door.

Warning! When the appliance is in use and

depending on the programme selected there can be

hot water in the pump.

Never remove the pump cover during a wash cycle, always

wait until the appliance has finished the cycle, and is

empty. When refitting the pump cover, ensure it is

securely re-tightened so as to stop leaks and young

children being able to remove it.

Cleaning the water inlet filters

Important! If the appliance doesn't fill, takes long to fill

with water, the starting button blinks yellow or the display

(if available) shows the relevant alarm (see chapter "What

to do if..." for more details), check if the water inlet filters

are blocked .
To clean the water inlet filters:

• Turn off the water tap.
• Unscrew the hose from

the tap.

• Clean the filter in the

hose with a stiff brush.

• Screw the hose back onto the tap. Make sure the

connection is tight.

• Unscrew the hose from the machine. Keep a rag

nearby because some water may flow.

• Clean the filter in the valve with a stiff brush or with

the piece of cloth.

35°

45°

• Screw the hose back to the machine and make sure

the connection is tight.

• Turn on the water tap.

Frost precaution

If the machine is exposed to temperatures below 0°C, cer-

tain precautions should be taken.
• Turn off the water tap.
• Unscrew the inlet hose.
• Place the end of the inlet hose in a bowl placed on the

floor, open the emergency emptying cap of the filter

and let water drain out.

• Refit the emergency emptying cap into the filter and

screw the water inlet hose back.

• When you intend to start the machine up again, make

sure that the room temperature is above 0°C.

Emergency emptying out

If the water is not discharged, proceed as follows to empty

out the machine:
• pull out the plug from the power socket;
• close the water tap;
• if necessary, wait until the water has cooled down;

18

Advertising