ZyXEL Communications PLA-470 - Manual (Page 60)

Chapter 6 Powerline Network Setup Tutorial
PLA-4xx Series User’s Guide
60
Figure 39 Making a New Network with the New Adapter
3 After you have set up a new network, you are ready to connect each powerline adapter
on your new network to devices, for example, a computer or a games console.
6.1.5 Splitting a Network into Two Networks
This section shows you how to split your existing network into two networks. This is useful if
you want to set up a second powerline network in your home, for example, in your study
connecting a laptop and printer. See
Figure 38 on page 59 for an example.
To set up your existing powerline network you had to set each powerline adapter with the
same network name. To move some of these adapters to a new network, you need to give them
a new network name.
1 Connect a powerline adapter to your computer and open the PLA-4xx Series
Configuration Utility (see Section 6.1.2 on page 56 ).
2 The utility should open to the configuration tab as shown below. A list of powerline
adapters on your network displays. These adapters all have the same network name as
the adapter you are connected to. The adapter you are connected to will appear as Local
in this table. All others are listed as Remote.