ZyXEL Communications PLA-470 - Manual (Page 80)

Appendix A Product Specifications
PLA-4xx Series User’s Guide
80
Power Outlet The power outlets are on the PLA491 only.
PLA491: Four power outlets with EMI filter.
Coaxial Port PLA 402 v2 only
Operation Environment PLA-400/401/400 v2/470/470 v2
Temperature: 0º C ~ 45º C
Humidity: 5% ~ 95% Noncondensing
PLA401 v2/402 v2
Temperature: 0º C ~ 45º C
Humidity: 10% ~ 85% Noncondensing
PLA491
Temperature: 0º C ~ 40º C
Humidity: 20% ~ 90% Noncondensing
Storage Environment PLA-400/401/400 v2/470/470 v2
Temperature: -10º C ~ 70º C
Humidity: 10% ~ 85% Noncondensing
PLA401 v2/402 v2
Temperature: -20º C ~ 60º C
Humidity: 10% ~ 90% Noncondensing
PLA491
Temperature: -30º C ~ 60º C
Humidity: 20% ~ 90% Noncondensing
Cabling Type PLA-400/400 v2/401/401 v2/402/470/470 v2
1 x Power Cord
PLA-400/400 v2/401/401 v2/402
1 x LAN UTP Category 5 or Better
PLA-402 v2
1 x Coaxial Cable (RG6 or RG59 cable with 75 ohm impedance preferred
but others are compatible. RG6 cables are common for CATV. F-Type Male
connector required.)
PLA-470/491
4 x LAN UTP Category 5 or Better
Network Interface PLA-400/400 v2/401/401 v2/402 v2/470/470 v2
1 x 200 Mbps Powerline port compliant with HomePlug AV standard
PLA-400/400 v2/401/401 v2/402 v2
1 x 10/100M BASE-T Ethernet port with Auto MDI/MDIX
PLA-470/470 v2/491
4 x 10/100 M Base-T Ethernet Ports with Auto MDI/MDIX
PLA-402 v2
1 x Coaxial Cable Port
Table 17 Hardware Specifications