ZyXEL Communications PLA-470 User Manual
Page 62
Advertising
Chapter 6 Powerline Network Setup Tutorial
PLA-4xx Series User’s Guide
62
Figure 42 Incorrect DAK or No DAK
• If you have correctly entered the DAK Password, click OK on the pop-up.
Figure 43 Correct DAK
5 The settings for the adapter will now grey out and the adapter will disappear from the
table after a few minutes.
Figure 44 An Adapter on Your New Network
6 Go back to step
3
in this section to set the same, new Network Name for all remote
adapters you want to add to your new network.
7 Check you have added the adapters correctly by changing the
network name
for the local
adapter. All adapters with the new Network Name now appear in the list of adapters on
your network. These adapters are now part of your new network.
Advertising