3Com WX4400 3CRWX440095A User Manual
Page 654
654
C
HAPTER
C: S
UPPORTED
RADIUS A
TTRIBUTES
Filter-Id
11
Yes
No
Optional If configured in the WX
switch’s local database,
this attribute can be an
access control list (ACL) to
filter outbound or inbound
traffic. Use the following
format:
filter-id inboundacl.in
or
filter-id outboundacl.out
If you are configuring the
attribute on a RADIUS
server, the value field of
filter-id can specify up to
two ACLs. Any of the
following are valid:
filter-id =
"Profile=acl1"
filter-id =
"OutboundACL=acl2"
filter-id = "Profile=acl1
OutboundACL=acl2"
(Each example goes on a
single line on the server.)
The format in which to
specify the values depends
on the RADIUS server.
Regardless of whether the
attributes are defined
locally or on a RADIUS
server, the ACLs must
already be configured on
the WX switch.
(For details, see
Chapter 19, “Configuring
and Managing Security
ACLs,” on page 377.)
Table 55 801.1X Attributes (continued)
Attribute
Type
Rcv in
Access
Resp?
Sent in
Access
Reqst?
Sent in
Acct
Reqst?
Description