3Com WX4400 3CRWX440095A - Manual (Page 655)

Supported Standard and Extended Attributes 655
Reply-
Message 18 Yes No No String. Text that can be
displayed to the user.
Multiple Reply-Messages
can be included. If any are
displayed, they must
appear in the order in
which they appear in the
packet.
State 24 Yes Yes No Can be sent by a RADIUS
server in an
Access-Challenge message
to the WX switch. If the
WX receives an
Access-Challenge with this
attribute, it returns the
same State value in an
Access-Request response
to the RADIUS server,
when a response is
required. (For details, see
RFC 2865.)
Class 25 Yes No Yes If received, this
information must be sent
on, without interpretation,
in all subsequent packets
sent to the RADIUS server
for that client session.
Vendor-
Specific 26 Yes No Yes String. Allows MSS to
support 3Com VSAs. (See
Table 56 on page 659.)
Session-
Timeout 27 Yes No Optional Maximum number of
seconds of service allowed
the user before
reauthentication of the
session.
If the global
reauthentication timeout
(set by the set dot1x
reauth-period command)
is shorter than the
session-timeout, MSS uses
the global timeout instead.
Table 55 801.1X Attributes (continued)
Attribute Type
Rcv in
Access
Resp? Sent in
Access
Reqst? Sent in
Acct
Reqst?
Description