3Com NBX 900-0208 - Manual (Page 91)

Paging 91
You can also park call by using Feature Code 444 or pressing an Access
button assigned to Call Park.
To notify another user about the parked call:
■
From 3Com Manager’s Telephones, place a new telephone call to
the user’s extension, or use the paging feature. See
“Paging” next
for details.
To retrieve a parked call:
1 Pick up the handset of any telephone on the system.
2 Dial the Call Park extension that was assigned to the call.
Paging Paging is the general term used to describe the act of broadcasting a
voice message through audio speakers.
You can:
■
Page all extensions with speakers on the system
This method uses default codes in Table 8 .
■
Page a subset of all extensions on the system, called a zone.
This method uses extensions that the administrator configures for this
purpose.
Each method allows you to broadcast a message to different destinations,
depending on your location and equipment.
Do not press the Feature button before you dial the Paging code.