3Com 1000 - Manual (Page 102)

5-28 C HAPTER 5: A DVANCED M ANAGEMENT
About Alarm Actions
You can define up to 700 alarms for the Switch. The
actions that you can define for each alarm are
shown in
Table 5-3 .
Table 5-3 Alarm Actions
Action High Threshold Low Threshold
No action.
Notify only. Send Trap.
Notify and
blip port. Send Trap. Block broadcast
and multicast traffic on
the port for 5 seconds.
Notify and
disable port. Send Trap. Turn port off.
Notify and
enable port. Send Trap. Turn port
on.
Blip port. Block broadcast and multi-
cast traffic on the port for
5 seconds.
Disable port. Turn port off.
Enable port. Turn port on.
Notify and
move resilient
port. Send Trap. If port is the
main port of a resilient link
pair then move to standby.
Notify and
blip device. Send Trap. Block broadcast
and multicast traffic on all
ports for 5 seconds.
Notify and
disable device. Send trap. Turn all ports
on device off.
Notify and
enable device. Send Trap. Turn ports
back to original state.
Blip device. Block broadcast and multi-
cast traffic on all ports for
5 seconds.
Disable device. Turn all ports on device off.
Re-enable
device. Turn ports back to
original state.