Optional parameter – ABAQUS Volume II: I–Z User Manual

Page 155

Advertising
background image

*MODAL PRINT

13.14

*MODAL PRINT:

Print generalized coordinate (modal amplitude) data during a mode-

based dynamic procedure.

This option is used during mode-based dynamic procedures to control the printed output of generalized
coordinate (modal amplitude and phase) values.

Product:

ABAQUS/Standard

Type:

History data

Level:

Step

Reference:

•

“Output to the data and results files,” Section 4.1.2 of the ABAQUS Analysis User’s Manual

Optional parameter:

FREQUENCY

Set this parameter equal to the output frequency, in increments. The output will always be printed
at the last increment of each step unless FREQUENCY=0. The default is FREQUENCY=1. Set
FREQUENCY=0 to suppress the output.

Data lines to request modal output in the data file:

First line:

1. Give the identifying keys for the variables to be printed. The keys are defined in the “Modal

variables” section of “ABAQUS/Standard output variable identifiers,” Section 4.2.1 of the
ABAQUS Analysis User’s Manual.

Repeat this data line as often as necessary: each line defines a table.

13.14–1

ABAQUS Version 6.1

Module: ID:

Printed on:

Advertising