ABAQUS Volume II: I–Z - Manual (Page 523)

*SURFACE PROPERTY
18.50 *SURFACE PROPERTY: Define surface properties for cavity radiation.
This option is used to define surface properties for cavity radiation analysis. It must immediately precede the
*EMISSIVITY option.
Product: ABAQUS/Standard
Type: Model data
Level: Model
References:
•
“Cavity radiation,” Section 32.1.1 of the ABAQUS Analysis User’s Manual
•
*EMISSIVITY
Required parameter:
NAME
Set this parameter equal to a label that will be used to refer to the property name for cross-referencing
to the surface definitions for which properties are being defined. Only element-based surfaces can
be used.
There are no data lines associated with this option.
18.50–1
ABAQUS Version 6.1 Module: ID:
Printed on: