ABAQUS Volume II: I–Z - Manual (Page 89)

*INTERACTION PRINT
9.23 *INTERACTION PRINT: Define print requests for spot weld interaction variables.
This option is used to provide tabular printed output of spot weld interaction variables.
Product: ABAQUS/Standard
Type: History data
Level: Step
References:
•
“Output to the data and results files,” Section 4.1.2 of the ABAQUS Analysis User’s Manual
•
“Mesh-independent fasteners,” Section 28.3.4 of the ABAQUS Analysis User’s Manual
Optional, mutually exclusive parameters:
NAME
Set this parameter equal to the name of the spot weld interaction for which this output request is
being made.
NSET
Set this parameter equal to the name of the node set for which this output request is being made.
Optional parameters:
FREQUENCY
Set this parameter equal to the output frequency, in increments. The default is FREQUENCY=1.
Set FREQUENCY=0 to suppress the output. The output will always be printed at the last increment
of each step unless FREQUENCY=0.
SUMMARY
Set SUMMARY=YES (default) to obtain a summary of the maximum and minimum values in each
column of the table and their locations. Set SUMMARY=NO to suppress this summary.
TOTALS
Set TOTALS=YES to print the total of each column in the table. The default is TOTALS=NO.
9.23–1
ABAQUS Version 6.1 Module: ID:
Printed on: