GE SECURITY Concord - Manual (Page 24)

Concord 16
Assigning the System Test Attribute
System Test is a user code attribute that allows the user to perform system tests. If the user code
does not have this attribute turned on, the user will not be able to perform phone or sensor tests.
To assign System Testing to a user:
1. Enter the programming menus by pressing 9 + System or Partition Master CODE .
2. Press 030 nnn 4 where nnn is user 000 through 229.
3. To turn System Testing:
on, press 2 + # .
off, press 1 + # .
4. Press * + 00 + # to exit the programming menus.
Assigning the Latchkey Report Attribute
Latchkey Report is a user code attribute that causes the panel to send a message to a pager when
the user changes system arming levels. See “Latchkey Paging.
To assign Latchkey Report to a user:
1. Enter the programming menus by pressing 9 + System or Partition Master CODE .
2. Press 030 nnn 5 where nnn is user 000 through 229.
3. To turn Latchkey Report:
on, press 2 + # .
off, press 1 + # .
4. Press * + 00 + # to exit the programming menus.
Setting the Time
and Date
Although the installer usually sets the time and date at the time of installation, the user can
change it when necessary.
To set the System Time:
1. Enter the programming menus by pressing 9 + System or Partition Master CODE .
2. Press 020 .
3. Enter the correct time in 24-hour format (4 digits--see Figure 6), then press # .
For example, if the current time is 7:23 a.m., press 0723 + # .
4. Press * + 00 + # to exit the programming menus.
Figure 6. 24-Hour Format
To set the System Date:
1. Enter the programming menus by pressing 9 + System or Partition Master CODE .
2. Press 021 .
3. Enter the current date as 6 digits (mm/dd/yy) then press # .
0 0 : 0 0
0 1 : 0 0
0 2 : 0 0
0 3 : 0 0
0 4 : 0 0
0 5 : 0 0
0 6 : 0 0
0 7 : 0 0
2 4 - H o u r F o r m a t
0 8 : 0 0
0 9 : 0 0
1 0 : 0 0
1 1 : 0 0
1 2 : 0 0
1 3 : 0 0
1 4 : 0 0
1 5 : 0 0 8 : 0 0 a m
9 : 0 0 a m
1 0 : 0 0 a m
1 1 : 0 0 a m
N o o n
1 : 0 0 p m
2 : 0 0 p m
3 : 0 0 p m
1 6 : 0 0
1 7 : 0 0
1 8 : 0 0
1 9 : 0 0
2 0 : 0 0
2 1 : 0 0
2 2 : 0 0
2 3 : 5 9 4 : 0 0 p m
5 : 0 0 p m
6 : 0 0 p m
7 : 0 0 p m
8 : 0 0 p m
9 : 0 0 p m
1 0 : 0 0 p m
1 1 : 5 9 p m
M i d n i g h t
1 : 0 0 a m
2 : 0 0 a m
3 : 0 0 a m
4 : 0 0 a m
5 : 0 0 a m
6 : 0 0 a m
7 : 0 0 a m