GE SECURITY Concord - Manual (Page 53)

Concord 45
Accidental Smoke and Fire Alarms
To silence the alarms and reset the sensor:
1. Press 1 + CODE , once to silence the alarm.
2. Press 1 + CODE , again to reset the smoke alarm.
Smoke and fire panic alarms cannot be cancelled and are always reported to the central station.
If, after disarming the system once, the system still thinks a sensor is open, disarm the system
again.
In the event of an accidental smoke or fire alarm, follow these dealer instructions:
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
Dialer Abort
Is the Dialer Abort feature enabled?
Yes. I have ____ seconds to cancel an accidental intrusion or auxiliary alarm before it is
reported to the central station.
No. All alarms are reported to the central station immediately.
Doors and Delay Time Settings
When the system is armed, enter and exit the premises only through designated delay doors.
Entry Delay Time: The time allowed to enter the premises and disarm the system.
Exit Delay Time: The time allowed to leave the premises after arming the system.
Door Door Location Ptn. Entry Delay Exit Delay
1 1 / 2 : :
2 1 / 2 : :
3 1 / 2 : :
4 1 / 2 : :
5 1 / 2 : :