AT&T System 25 - Manual (Page 22)

Park
Parked calls are held calls that can be picked up from any
telephone in the system. When you use the park feature, you
cannot use this feature again on the same phone until the
original parked call is completed. If a parked call is not picked
up within a preset interval (the usual time is two minutes), it
will ring back at the telephone that originally parked the call.
Using Park
1 Press the switchhook and listen for confirmation and dial
tone.
2 Press * 5 .
❑ ❑
3 Listen for confirmation tone and dial tone.
4 If the call is for someone else, dial or page that person,
notifying them of the Attendant Console or extension
number that parked the call.
NOTE: If the person does not answer,
twice and complete your conversation
5 Hang up.
Picking Up Parked Calls
press the switchhook
with the caller.
1 Listen for dial tone, then press * 8 .
❑ ❑
2 Dial the extension number that parked the call.
19