AT&T System 25 - Manual (Page 28)

Speed Dialing
Speed dialing allows you to dial telephone numbers (or account
codes) by simply dialing “ #” and a 2- or 3-digit code. There are
two kinds of speed dialing: Personal and System.
Personal Speed Dialing codes are 2-digit numbers that allow you
to program up to twenty personal numbers. These Personal
Speed Dialing codes use the numbers #20 through #39.
System Speed Dialing codes are programmed by your System
Administrator, and are used for numbers that are frequently
called by people in your company. System Speed Dialing codes
use the numbers # 100 through # 189.
For instructions on how to program Personal Speed Dialing
numbers, see the previous section for “Programming or
Removing Personal Speed Dialing Codes”.
Placing Calls
1 Listen for dial tone.
2 Dial the #, followed by the speed dialing code (20 through 39
or 100 through 189).
should be transmitted to the far end).
You program: 9*5554444** # 812345
This means: 9 (1.5 second pause) 5554444
(3 second pause)
(start end-to-end signaling) 12345
(Continued)
23