3M MP8030 - Manual (Page 17)

14

3M 1996 3M

Multimedia Projector MP8030
4-7. Input Menu
4-7-1. Selecting the Input Source
The input source is selected from the Input menu. The 3M

Multimedia Projector MP8030 has an automatic
video selection function that will choose the correct video system or you can manually select the video system.
Press the left/right menu arrow ( ←
MENU
→ ) or move the stick switch left/right to select the INPUT menu
and the VIDEO1/2 SYSTEM sub-menu. If you select an input source that is not connected, the start-up screen
with an error message will display. Press the menu button to remove the menu display.
VIDEO1
→
SETUP INPUT IMAGE OPT.
RGB1
RGB2
VIDEO2
→
TEST PATTERN
SYSTEM
AUTO
NTSC
PAL
SECAM
Select this option: To select:
RGB1 Computer 1 (RGB) terminal
RGB2 Computer 2 (RGB) terminal
VIDEO1 Video1 terminal (AUTO, NTSC, PAL, SECAM)
VIDEO2 Video2 terminal (AUTO, NTSC, PAL, SECAM)
TEST PATTERN Display the test pattern start up screen
4-8. Image Menu
4-8-1. Inverting the Image
The image can be inverted for ceiling mounted or rear projection applications. Press the left/right menu arrow
( ← MENU → ) or move the stick switch left/right to select the IMAGE menu and the MIRROR sub-menu.
MIRROR
SETUP INPUT IMAGE OPT.
BLANK
REVEAL
MENU SIZE
→
→
→
→
NORMAL MIRROR
H:INVERT
V:INVERT
H&V: INVERT MESSAGE
→
Select this option: To adjust the following:
H:INVERT Invert the image horizontally
V:INVERT Invert the image vertically
H&V:INVERT Invert the image both horizontally and vertically