3M MP8030 - Manual (Page 19)

16

3M 1996 3M

Multimedia Projector MP8030
4-8-5. Display Startup Screen/Error Message
If no input is detected when switching to an RGB or video source, either the startup screen and error message
“NO INPUT DETECTED” or a blank screen with no error message will display. Press the left/right menu
arrow (
← MENU → ) or move the stick switch left/right to select the IMAGE menu and the MESSAGE
sub-menu.
MESSAGE
MENU SIZE
MIRROR
SETUP INPUT IMAGE OPT.
BLANK
REVEAL
→
→
→
→
→
MESSAGE OFF
MESSAGE ON
Select this option: To display:
MESSAGE ON Startup screen and error message display if no input is detected
MESSAGE OFF Blank screen, no message, no startup screen if no input detected
4-9. Options (OPT.) Menu
4-9-1. Communication Speed
The data speed of transmission (bPS) can be set for the computer mouse control. Press the left/right menu
arrow (
←
MENU
→ ) or move the stick switch left/right to select the SETUP menu and the COM. SPEED
sub-menu. The computer mouse for most IBM compatible computers will operate at a baud rate of 1200.
COM. SPEED
SETUP INPUT IMAGE OPT.
COM. BITS
MOUSE
TIMER
LANGUAGE
AUTO OFF
→
→
→
→
→
→
(MOUSE)
2400
4800
9600
19200
COM. SPEED
(bPS) 1200
Select this option: To adjust the following:
Communication Speed (bPS) Data speed of transmission: 1200 (mouse), 2400, 4800, 9600, 19200
4-9-2. Communication Bits
The data format of transmission is set with this option. Press the left/right menu arrow ( ← MENU → ) or move
the stick switch left/right to select the OPT. menu and the COM. BITS sub-menu. The computer mouse
for most IBM compatible computers will operate at a speed of 7N1.
COM. BITS
COM. SPEED
SETUP INPUT IMAGE OPT.
MOUSE
TIMER
LANGUAGE
AUTO OFF
→
→
→
→
→
→
7N1
8N1
(MOUSE)
COM. BITS
Select this option: To adjust the following:
Com. Bits: Speed of mouse
movement 7N1 (mouse) 7 data-bits, no parity, 1 stop bit . .
8N1 8 data-bits, no parity, 1 stop bit . . . . . . . . .