3M MP8030 - Manual (Page 30)

27

3M 1996 3M

Multimedia Projector MP8030
9-5. Computer Video (RGB) Input Terminal
The following illustration (Figure 9-1) shows the terminal connections for the D-sub 15 pin HD connector.
Refer to the table below for a description of the wire to pin connections.
1
6
11 15
10
Figure 9-1. D-sub 15 pin HD Connector
Pin # Description Pin # Description
1 Video signal (red) 9 No Connection
2 Video signal (green) 10 Ground
3 Video signal (blue) 11 Ground
4 No Connection 12 No Connection
5 No Connection 13 Horizontal/composite sync signal
6 Ground (red) 14 Vertical sync signal
7 Ground (green) 15 No Connection
8 Ground (blue)
9-6. S-Video Input Signal Terminal
The following illustration (Figure 9-2) identifies the terminal connections for the Mini DIN4-pin.
Luminance
Signal
Chrominance
Signal
Ground Ground
Figure 9-2. S-Video Input (Mini DIN4-pin)
Video input signal terminals are detected by the MP8030 in the following order of priority:
1) S-video input terminal
2) RCA jack input terminal
9-7. RS-232 Cable (Mouse Control)
The computer to projector terminal connection for the D-sub 9 pin HD
connector (Figure 9-3), is shown below.
CD
RD
TD
DTR
GND
DSR
RTS
CTS
RI
1
2
3
4
5
6
7
8
9
Computer
1
RD
TD
GND
CTS
2
3
4
5
6
7
8
9
Projector
NC
NC
NC
NC
NC
1
9
Figure 9-3. RS-232 Connector