3M MP8030 - Manual (Page 8)

5

3M 1996 3M

Multimedia Projector MP8030
Section 3: Setup
3-1. Cable Connections
It only takes a few minutes to connect the 3M

Multimedia Projector MP8030 to your computer, VCR or other
video device (Figure 3-1).
CRT Display
Desktop Computer
Laptop Computer
Figure 3-1. Typical Cable Configuration
Terminal Connection Panel
Take a moment to look over the input connection
terminals (Figure 3-2) on the side of the projector.
Connect your first input source to the Terminal 1
connectors and your second input source to the
Terminal 2 connectors.
Terminal connectors for VIDEO/AUDIO 1&2 are:
S-Video, Video, Audio-L and Audio-R.
Terminal connectors for Computer1 (RGB1) are:
RGB-In and Audio-In 1.
Terminal connectors for Computer2 (RGB2) are:
RGB-In, Audio-In 2 and Control.
Terminal connectors for output are: RGB-Out (CRT),
Audio-Out (stereo) and RS-232 (mouse control).
Video/Audio2
Computer 2
(RGB2)
Power Cord Power Switch
Computer 1
(RGB1)
Video/Audio1
Audio-In 1/2
Audio-Out
(stereo)
CRT Display
(RGB-Out)
RS-232
Mouse Control
Figure 3-2. Input Connection Terminals