3Com 3C16895 - Manual (Page 60)

60 C HAPTER 4: M AINTAINING S OFTWARE
CPU type : MPC8245
CPU Clock Speed : 400Mhz
BUS Clock Speed : 66Mhz
BOOT_FLASH type : M29W040B
Flash Size : 32MB
Memory Size : 256MB
FAB96 self testing..........................................
SDRAM Data lines Selftest.................................OK!
SDRAM Address lines Selftest..............................OK!
SDRAM fast selftest.......................................OK!
Please check LEDs.....................LEDs selftest finished!
CPLD selftest.............................................OK!
FPGA selftest.............................................OK!
The switch Mac address is .....................0020.4C6A.CF04
Press Ctrl+B to enter Boot Menu...
The contents displayed on the terminal can vary with different versions of Boot
ROM.
If you press Ctrl+B immediately, the system displays the Boot Menu. If you do not
press Ctrl+B, the system initiates the program decompression process. At this time
if you want to access the BOOT Menu, you must reboot the switch.
Press Ctrl+B. The system displays:
Initialize flash file system. Please wait!
Password :
Enter the BootROM password. After entering the correct password (no password
is set for the switch by default), the system will access the BOOT Menu:
Boot Menu
1: Download application file to flash
2: Select application file to boot
3: Display all files in flash
4: Delete file from flash
5: Modify bootrom password
0: Reboot
Enter your choice(0-5):
CAUTION: While using the switch, please keep in mind the modified BOOTROM
password.