Arcam D33 - Manual (Page 10)

e-10
These are the Ir commands generated from the DAC remote
control, and accepted by the D33. The codes are useful if
you wish to programme another remote handset to control
the D33. The codes are given in the format SystemCode–
CommandCode. 27 (0x1B) is the Arcam System Code for
a DAC and 16 (0x10) is the Arcam System Code for an
amplifier.
Key name Decimal Hexadecimal
2 (pOWER)
27–12 0x1B–0x0C
@ (MuTE) 16–13 0x10–0x0D
+ (vOluME +) 16–16 0x10–0x10
; (pAuSE)
27–48 0x1B–0x30
< (STOp)
27–54 0x1B–0x36
- (vOluME -) 16–17 0x10–0x11
0 (SkIp bACk)
27–33 0x1B–0x21
4 (plAy)
27–53 0x1B–0x35
/ (SkIp FORWARDS)
27–32 0x1B–0x20
uSb 27–8 0x1B–0x08
IpOD 27–18 0x1B–0x12
COAx 1 27–4 0x1B–0x04
COAx 2 27–5 0x1B–0x05
AES 27–6 0x1B–0x06
OpT 1 27–0 0x1B–0x00
OpT 2 27–2 0x1B–0x02
FIlTER 27–70 0x1B–0x46
IR
commands
The system code can be changed
from 27 (0x1B) to 28 (0x1C).
Please refer to page E-9 for details.
CR107
AES
OPT1 OPT2 FILTER
COAX 1 COAX 2
USB
+
-
iPod
legal
information
Microsoft, Windows Media and Windows are either registered
trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
Apple, Mac, Mac OS, iTunes, iPhone, iPod, iPod classic, iPod
nano, iPod shuffle, and iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries. iPad is a trademark
of Apple Inc.
"Made for iPod,” “Made for iPhone,” and “Made for iPad” mean
that an electronic accessory has been designed to connect
specifically to iPod, iPhone, or iPad, respectively, and has
been certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this
device or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, iPhone, or
iPad may affect wireless performance.
Linux® is the registered trademark of Linus Torvalds in the U.S.
and other countries.
Ubuntu is a registered trademark of Canonical Ltd.
JetPLL™ is a trademark of TC Applied Technologies Ltd.