8e6 Technologies Enterprise Filter Authentication R3000 - Manual (Page 15)

C
HAPTER
1: I
NTRODUCTION
A
BOUT THIS
U
SER
G
UIDE
8
E
6 T
ECHNOLOGIES
, R3000 I
NTERNET
F
ILTER
A
UTHENTICATION
U
SER
G
UIDE
1
C
HAPTER
1: I
NTRODUCTION
The R3000 Authentication User Guide contains information
about setting up authentication on the network.
About this User Guide
This user guide addresses the network administrator desig-
nated to configure and manage the R3000 server on the
network.
Chapter 1 provides information on how to use this user
guide, and also includes an overview of filtering compo-
nents and authentication solutions.
Chapters 2, 3, and 4 describe the R3000 Administrator
console entries that must be made in order to prepare the
network for using authentication for NT and/or LDAP
domains.
NOTE: Refer to the R3000 Quick Start Guide for information on
installing the unit on the network.
This document also provides
information on how to access the R3000 console to perform the
initial installation setup defined in Chapter 2: Network Setup.
After all settings have been made, authentication is ready to
be used on the network. Chapter 5 explains how to assign
groups and members for management by Sub Admin group
administrators, and how group administrators create and
maintain filtering profiles for entities in their assignment.
Chapter 6 outlines the step you need to take to test and to
activate your settings before deploying authentication on
the network.
Chapter 7 provides support information. Appendices at the
end of this user guide feature instructions on authentication
operations; steps to modify the SMB protocol to disable
SMB Signing requirements; information on how to obtain or
export an SSL certificate and upload it to the R3000; notes