8e6 Technologies Enterprise Filter Authentication R3000 - Manual (Page 53)

C
HAPTER
2: N
ETWORK
S
ETUP
S
ET UP THE
N
ETWORK FOR
A
UTHENTICATION
8
E
6 T
ECHNOLOGIES
, R3000 I
NTERNET
F
ILTER
A
UTHENTICATION
U
SER
G
UIDE
39
Router or firewall mode
1. Enter the following information:
• In the LAN1 IP field of the IP/Mask Setting frame, enter
the IP address and specify the corresponding subnet
of the “LAN1” network interface card to be used on the
network.
• In the LAN2 IP field, enter the IP address and specify
the corresponding subnet of the “LAN2” network inter-
face card to be used on the network.
TIP: The LAN1 and LAN2 IP addresses usually should be placed
in different subnets.
• In the Primary IP field of the DNS frame, enter the IP
address of the first DNS server to be used for resolving
the IP address of the authentication server with the
machine name of that server.
• In the Secondary IP field of the DNS frame, enter the
IP address of the second DNS server to be used for
resolving the IP address of the authentication server
with the machine name of that server.
• In the Gateway IP field of the Gateway frame, enter
the IP address of the default router to be used for the
entire network segment.
2. Click Apply to apply your settings.
NOTE: Whenever modifications are made in this window, the
server must be restarted in order for the changes to take effect.