3M MP8746 - Manual (Page 14)

3M ™ Personal Projector MP8746/MP8747 14 © 3M IPC 2000
The mouse type and cable type are determined by the type of computer used. Use the table shown below to
select the appropriate cable or refer to your computer’s user manual. Connect as shown in the diagram.
Remote Control Mouse Function
For PS/2, ADB (Mac), Serial
1. Turn off the computer and use the appropriate cable to connect the computer to mouse unit.
2. Turn on the computer and use the mouse function of the remote control. If there are any problems, check
the cable connections and reboot the computer.
3. Refer to the remote control instructions on page 12 for more instructions concerning mouse operation.
Section 2: Product Description
Mouse Emulation (continued)
Caution
• Before connecting, read the manual(s) of the equipment being connected.
• Turn off the computer power supply before connection.
• Use only the mouse cable provided.
• In the case of laptop computers with a built-in pointing device (such as a
trackball), the device will sometimes have priority even if a mouse is
connected. If necessary, disable the device and change the BIOS setting
(system setup) so that an external mouse can be selected. Restart the com
puter after changing the BIOS setting. Refer to the computer manual for
more information on this setting.
• Some computers may not have the utility program to operate a mouse.
Refer to the computer hardware manual.
Figure 2.6 Mouse Connection Table
Mouse
Type
Projector
Control/USB
Terminal
D-Sub 15P
(female)
D-Sub 15P
(female)
D-Sub 15P
(female)
Accessory Cable PC Connector
USB A type
(host) USB B type
(device)
PS/2 + Serial
Mac + Serial
Serial
Serial
USB
USB
ADB
(Mac)
PS/2
MINI-DIN 6P
(female)
MINI-DIN 4P
(female)
D-Sub 9P
(male)
✓ Note: USB, Serial, and ADB mouse cables are optional accessories. Please refer to page 30 for
ordering information.