3M MP8746 - Manual (Page 18)

3M ™ Personal Projector MP8746/MP8747 18 © 3M IPC 2000
Section 4: Adjustments and Functions
Plug & Play Function
Plug & Play is a system configured with peripheral equipment (including a computer and display), and a
compatible operating system. This allows the user to connect various peripheral equipment successfully
without having to adjust settings manually. The equipment and projector exchange this information automati-
cally. This projector is VESA DDC (Display Data Channel) 1/2B compatible. Plug & Play is possible by
connecting to a computer that is VESA DDC compatible.
✔ Note: Use the RGB cable included with this projector when using plug & play. With other
cables, pins (12) - (15) are sometimes not connected (effective only for RGB 1 terminal).
Freeze Function
The Freeze function is used to display (freeze) a single frame of the image being projected. This function can
be used with the Magnify function to freeze the image and then enlarge (magnify) part of the image to view it
in greater detail. Press the FREEZE button repeatedly to engage or disengage this function.
✔ Note: The FREEZE function will turn off during the operation of the MENU, VOLUME,
MUTE, BLANK, TIMER, AUTO or POSITION functions.
Magnify Function
The Magnify function is used to enlarge a portion of the projected image. Press the MAGNIFY (+) button to
magnify the center of the displayed image. Press again to magnify up to 4x. Press the MAGNIFY (-) button to
reduce image size. Press OFF to return to normal image size.
Position Function
To move the display area being magnified, press the POSITION button, then use the menu directional arrow
buttons to move the magnified area up, down, left or right.
✔ Note: To return to normal display, press the MAGNIFY OFF button. The MAGNIFY function
will turn off during the operation of the KEYSTONE or AUTO functions.
Input Select Function
To change the input signal being received by the computer, select RGB1, RGB2, VIDEO, or S-VIDEO. The
selected signal name is displayed for approximately three seconds when the input signal is changed.
Reset Function
To restore an item to its default (initial) setting, select the item and press the RESET button. For position
adjustment, press the RESET button and the POSITION button. (Valid only with RGB signal input.) RESET
function is not valid in VOLUME, LANGUAGE, or H. PHASE items. The RESET button may also operate as
a mouse control button.