3M M170 - Manual (Page 27)

Chapter 3 Video Display Options 27
AUTO CONFIG
If you change your display to Windows shut down mode, this adjustment will work
better. Click on the "Start" button at the bottom right side, and then click Shut
Down. This will bring you to the Windows shutdown mode. Then select Auto
Adjust. The screen will adjust within 4 seconds.
AUTO ADJUST
Performs automatic configuration of the Phase, Clock, vertical, and horizontal
position.
AUTO TRACKING
Tunes the clock and phase to the best condition automatically.
AUTO POSITION
Centers the image automatically. Both horizontal and vertical position is
adjusted such that the image is centered on the panel.
AUTO COLOR
Adjusts the gain and offset of the Red, Green and Blue channels on the ADC
automatically.
1:2 INPUT LEVEL
Selects the applicable input source analog input (D-sub), or digital input (DVI-D).
INFORMATION
Provides the user with detailed information regarding the current input format and
version (including resolution, pixel clock, vertical /horizontal frequency, software
version, and input source).
RECALL
Resets the control functions back to the original factory preset values. In order for
the Recall function to work, the timing must fall under one of the factory preset
timing modes.
SHARPNESS
Adjusts the video quality to be sharp or blurry (special for text mode).
COLOR TEMPERATURE
Adjusts color temperature to PRESET 1 (9300 color temperature) or PRESET 2
(6500 color temperature). Or, for a custom color mode, select USER and push the
select button to activate the RGB submenu. This adjusts the intensity of the RGB
video output. Using the select button activate the Red (Red Gain), Green (Green
Gain) or Blue (Blue Gain) and change color strength for a customized color mode.
By adjusting a single color, you can make the picture look warmer (biased towards
red) or cooler (biased towards blue). Adjusting all three levels will make colors
appear more or less striking.
OSD
Adjust the OSD image horizontally or vertically by pressing the Select button. H-
position moves the OSD position left or right. V-position moves the OSD position
up or down.
Icon Description
3M Touch Systems Proprietary Information