3M M170 - Manual (Page 5)

Overview
Welcome to the world of 3M Touch Systems — a world where using a computer is as
simple as touching the screen. This guide describes how to set up your M170 Flat Panel
Display (FPD) touch monitor.
This document assumes you have basic computer skills. You should know how to use
the mouse and keyboard, choose commands from menus, open and run application
programs, and save files.
Important Safety Information
Read and understand all safety information before using this product. Follow all
instructions marked on the product and described in this document. Pay close attention to
the following installation warnings and safety precautions.
Intended Use
The M170 flat panel display (FPD) touch monitor was designed for touch input and
tested to replace an existing monitor. These monitors are intended for indoor use
only and are not designed for use in hazardous locations.
DANGER
To avoid the risk of fire and/or explosion which will result in serious injury or death:
• Do not install or use this product in a hazardous location.
WARNING
To avoid the risk of fire which could result in serious injury or death:
• Do not remove the cover or back of the monitor.
To avoid the risk of electric shock which could result in serious injury or death:
• This device must be operated with the original power supply, part number: HJC,
HASU05F.
• Do not use a damaged power supply.
• Do not use a power cord that is frayed or otherwise damaged.
3M Touch Systems Proprietary Information