2Wire Gateway None - Manual (Page 103)

Management and Diagnostic Console
98
Reviewing Training History
The Training History pane provides a record of the last 20 connection attempts. The current connection or
connection attempt is displayed in the last row.
Impulse Noise
Comp. Tones Indicates the number of
compensation tones on which
impulse noise is detected. For
non-interleaved lines with
impulse noise, the connect
rate will be lowered to avoid
excessive errors on the line;
however, impulse noise may
vary with time, so connect
rates may vary accordingly.
Impulse Noise Compensation
is currently disabled for
interleaved lines. The ideal value is
zero (0). Ok or Suspicious -
Impulse noise detected .
Excessive
Impulse Noise Indicates to what degree
impulse noise is present on
the line. The ideal value is
zero (0).
Impulse noise
protection Measurement of how much
impulse noise can be
mitigated. Dependent on the
current line configuration.
Delay of latency
path Measurement of how much
delay is introduced.
Dependent on the current line
configuration.
Item Description
Time Initially this field will display the time (since power on) in DAYS HH:MM:SS format,
until the gateway can access the Internet and retrieve the current local time.
Subsequently the time (since power on) is displayed in YY:MM:DD and HH:MM:SS
format.
Line The line (1 or 2) on which the gateway is searching for a DSL signal.
Downstream
Rate The net user data rate (in kbps) for the connection.
Max 1 Maximum rate achievable at the time of the initial connection based on the line
quality (specifically, the uncapped rate).
Item Description Value Comment