2Wire Gateway None - Manual (Page 117)

Management and Diagnostic Console
112
To manually set the time and date:
1. Check the Enable checkbox.
2. In the Time field, enter the time in 24-hour HH:MM:SS format (for example, 10:02:11).
3. In the Date field, enter the date in YYYY/MM/DD format (for example, 2006/10/09).
4. From the Time Zone pull-down menu, select the time zone. The available time zones are Hawaii, Alaska,
Pacific, Mountain, Arizona, Central, Eastern, Indiana, and Atlantic (Canada).
5. Check the Daylight Savings Time checkbox if you wish to automatically adjust for daylight savings time.
You can also specify the time servers from which you wish to obtain system time by entering the time server
Internet address in the Time Servers fields. These settings are typically provided by the service provider
and/or backend management system.