2Wire Gateway None User Manual
Page 43
VoIP Network Tab
38
9.
Congratulations, setup is complete. Click
DONE
to return to the Voice Network summary page. If you
want to change your settings, go to the System Summary page, then click the Voice Network tab.
Once the VoIP server configuration settings have been implemented, open a browser and enter http://
gateway.2wire.net. Click the Voice Network tab. The View Voice Network page displays. You can view the
status of your VoIP line(s) in the Status at a Glance section.
Note:
To make any broadband connection settings changes, such as configuring the voice
servers, refer to the Management and Diagnostic Console. See “Management and
Diagnostic Console” on page 58.
Note:
To comply with Australian standards, local ports shall not be connected via shared
building cabling.