8e6 Technologies Enterprise Filter R3000IR - Manual (Page 39)

8
e
6 R3000iR Q
uick
S
taRt
G
uide
3
D. Click Apply.
Network: LAN Settings
From the navigation panel, click Network and choose LAN Settings from the pop-up
menu:
Make the following entries for the R3000 in the LAN Settings window:
A. Enter the Host Name that includes your domain name, for example R3000SERVER.
myserver.com (the NetBIOS name must be capitalized). It is important to enter
something identifiable, because once the product is registered, this host name is
used by 8e6 Technologies to recognize your account for library updates. This name
needs to be a valid DNS entry.
B. Enter the LAN1 IP address and specify the subnet for LAN 1, the R3000’s first Ether-
net Network Interface Card (NIC).
For the invisible mode, you may use a non-routeable IP address for the listening
interface and a subnet mask of 255.255.255.255 (32 bites).
C. Enter the LAN2 IP address and subnet for LAN 2, the R3000’s second Ethernet NIC.
The subnet selection is usually 255.255.0.0 (16 bites) or 255.255.255.0 (24 bites),
but cannot be 255.255.255.255 (32 bites).
For the router or firewall mode, the LAN 1 IP address should be in a different subnet
than the LAN 2 IP address.