8e6 Technologies Enterprise Filter R3000IR - Manual (Page 40)

36 8
e
6 R3000iR Q
uick
S
taRt
G
uide
WARNING: For the router and firewall mode, do not use the same subnet for
LAN 1 and LAN 2 or the console will become inaccessible.
D. Enter the Primary IP address of the first DNS name server. The R3000 uses this
name server to resolve the domain name requested by users from the LAN.
E. Enter the Secondary IP address of the second DNS name server. The R3000 will
use this name server to resolve the domain name requested by users from the LAN if
the first DNS isn’t working.
F. Enter the Gateway IP address for the default router or firewall that is the main
gateway for the entire network. The R3000 will use this IP address to communicate
outside the network.
WARNING: Be sure to take note of the LAN 1 and LAN 2 IP addresses and
host name you assigned to the R3000. It is strongly suggested you document
and store this information as it is now the only way of communicating with
the R3000.
G. Click Apply.
Network: NTP Servers
From the navigation panel, click Network and choose NTP Servers from the pop-up
menu: