3Com V7000 - Manual (Page 68)

68 C HAPTER 6: S TANDARD F EATURES
call pickup or group call pick up to answer a call that is ringing at
another group member's telephone.
■
Speed Dials — You or your administrator can assign the following to
a speed dial button:
■
The feature code for directed call pickup (455).
■
Only the feature code for directed call pickup (455).
Silent Monitor and
Barge In The VCX system supports Silent Monitor and Barge In. These two features
are typically used in call centers to allow supervisors to listen to (monitor)
and optionally join (barge in) a conversation between an agent and a
customer to ensure proper customer support. Unless the supervisor
barges in, neither the agent or the customer are aware that the
supervisor is monitoring the call.
To invoke Silent Monitor, the supervisor enters a feature code followed by
the extension to be monitored (see
Monitoring a Call ). The supervisor, in
this case, is defined as a user who is allowed to invoke the Silent Monitor
feature for that particular extension. Permission to monitor one or more
extensions is configured through the VCX Administrator Interface (see
the VCX Administration Guide). The supervisor must use a phone with a
Display Panel (not a 3Com Model 3100 Entry Telephone). If a supervisor
attempts to monitor an extension without permission, the supervisor
hears an error tone and the LCD shows
Unauthorized
. The supervisor
and the monitored agent can be located at different sites.
If a supervisor attempts to monitor an agent’s extension, the supervisor
phone LCD will display the error message
no calls to supervise
if:
■
The agent is not logged in.
■
The agent is not on a call.
■
The agent is currently monitored by another supervisor.
While in Silent Monitor mode, the supervisor can join the conversation by
entering the feature code for Barge In. After barging in, the supervisor
can return to Silent Monitor mode by reentering the Silent Monitor
feature code. See
Barging In .
A user can ensure a private call by blocking Silent Monitor and Barge In.
To make a private call, the user enters a feature code before dialing the
call.