3M MicroTouch M150 - Manual (Page 18)

18 M150 FPD Monitor Installation Guide
4. Plug the AC/DC power supply into the M150 FPD. Be sure to use the power supply included
with the monitor.
Figure 7 Identifying Your Monitor Connections
Video Connection Microphone out Line In
Touch Screen
Power
WARNING
To avoid the risk of electric shock which could result in serious injury or death:
This device must be operated with the original power supply, part number: HJC,
HASU05F or CHI, CH-1234.
CAUTION
To avoid the risk of electric shock which may result in minor or moderate injury:
The socket-outlet should be installed near the equipment and should be easily accessible.
Use a power cable that is properly grounded. Always use the appropriate AC cord certified
for the individual country. Some examples are listed below:
USA UL
Switzerland SEV
Canada CSA
Britain BASE/BS
Germany VDE
Japan
Electric Appliance Control Act
5. Connect the power cable to the AC/DC supply. Connect the other end to the appropriate AC
outlet.
Figure 8 Connecting the M150 Cables to your Computer
You should be sure all cable connections are secure -- tighten all cable screws. Shaking
and vibration may dislodge cables that are improperly connected.
3M Touch Systems Proprietary Information