3M MicroTouch M150 - Manual (Page 23)

CHAPTER 3
Video Display Options
This chapter provides guidelines for adjusting the video display and using the monitor
controls to adjust the image to your liking. Before you make any adjustments:
• Be sure to adjust the controls in your normal lighting conditions.
• Display a test image or pattern whenever you adjust the video.
Adjusting the M150 Video Display
Your M150 FPD monitor has four controls to adjust the video display.
• MENU – Shows or hides the menu.
• SELECT -- Highlights the current menu option or saves the current setting. Press ► or ◄ to
change the value.
• ◄/Left -- Enables you to scroll backwards through items on the menu -- decrease the value of
selected option or move to the previous menu item.
• ►/Right -- Enables you to scroll forward through items on the menu -- increase the value of
selected option or move to the next menu item.
If you do not press the Menu, Select, or ◄/left or ►/right adjust buttons for 45 seconds,
the monitor adjustment program times out and hides the menu options. You can press the
Menu button at any time to display the options again.
Pressing MENU will pull up the On Screen Display (OSD) menu, as shown below.
Figure 10 M150 Main Menu Options
Auto Bright Contrast Color Position Image Misc
Config
3M Touch Systems Proprietary Information