Garmin GNS 530 - Manual (Page 138)

GNS 530(A) Pilot’s Guide and Reference 190-00181-00 Rev. H 7-22
SECTION 7
WPT PAGES
6) The cursor moves to the distance (DIS) field.
Use the small and large right knobs to change
the distance from the reference waypoint to the
new user waypoint, if desired. Press the ENT
Key to accept the selected distance.
7) The cursor moves to the ‘Modify?’ action field.
Press the ENT Key to modify the waypoint.
8) Press the small right knob to remove the
flashing cursor.
NOTE: If the pilot attempts to modify or delete a
waypoint which is currently a direct-to waypoint
or the current ‘from’ or ‘to’ waypoint in the active
flight plan, the GNS 530 alerts the pilot with the
‘Can’t change an active waypoint’ or ‘Waypoint
is active and can’t be deleted’ message. The
pilot must first cancel the direct-to or remove
the waypoint(s) from the active flight plan before
modifying or deleting the waypoint(s).
User Waypoint Page Options
The following User Waypoint Page options are available
by pressing the MENU Key:
• View User Waypoint List? - displays a list of all
user waypoints currently stored in memory.
• Delete User Waypoint? - Allows the pilot to delete
the selected waypoint from memory.
• Crossfill? - Allows the pilot to transfer a user
waypoint to another 400/500 series unit (if
installed). Please refer to Sections 5.1 and 10.1
for detailed information on crossfill.
Viewing a list of all user waypoints:
1) From the User Waypoint Page, press the MENU
Key to display the User Waypoint Page Menu.
2) Turn the large right knob to highlight ‘View
User Waypoint List?’ (Figure 7-44) and press
the ENT Key.
Figure 7-44 User Waypoint Page Menu
3) The top of the User Waypoint List indicates the
total number of user waypoints currently used
and available memory. If more user waypoints
are stored than can be displayed on a single
screen, turn the large right knob to scroll
through the User Waypoint List.