Festool PLANEX LHS 225 EQ - Manual (Page 20)

20
•
To ensure constant air circulation, always keep
the air vent slits in the motor housing clean and
free of blockages. Read the instructions on visual
warning signals in chapter 8 "Operation".
• Clean the contact slide regularly. Do not use hard
objects.
The machine is equipped with self-disconnecting
special carbon brushes. If they are worn, power is
interrupted automatically and the machine comes
to a standstill.
Tighten the clamping levers if they no longer ca-
pable of retaining the extension pipe properly:
• Turn the screws on the clamping levers [2-1] and
[2-2] approx. 1/8 of a turn.
10 Accessories, tools
Use only original Festool accessories and Festool
consumable material intended for this machine
because these components are designed specifi -
cally for the machine. Using accessories and con-
sumable material from other suppliers will most
likely affect the quality of your working results and
limit any warranty claims. Machine wear or your
own personal workload may increase depending on
the application. Protect yourself and your machine,
and preserve your warranty claims by always using
original Festool accessories and Festool consum-
able material!
The order numbers of the accessories and tools
can be found in the Festool catalogue or on the
Internet under “www.festool.com”.
11 Disposal
Do not throw the power tool in your household
waste! Dispose of machines, accessories and pack-
aging at an environmentally-responsible recycling
centre. Observe the valid national regulations.
EU only: European Directive 2002/96/EC stipulate
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
12 Warranty
For our tools, we give warranty for material and
production defects in accordance with the locally
applicable legal provisions, but in any case for at
least 12 months. Within the EU member states, the
warranty period is 24 months (verifi cation through
invoice or delivery note). Damage caused by, in
particular, natural wear, overloading, incorrect
handling, or damage caused by the operator, or
damage caused through use of the equipment con-
trary that specifi ed in the Operating Instructions, or
damage which was known at the time of purchase,
is not covered by the warranty. Furthermore, dam-
age caused by the use of non-original accessories
and consumable materials (e.g. sanding pads) is
also excluded. Complaints can only be recognised
if the tool is returned while still assembled to the
supplier or an authorised Festool Customer Serv-
ice workshop. Keep the Operating Instructions,
Safety Instructions, Spare Parts List and purchase
receipt in a safe place. Otherwise the respective,
current warranty conditions of the manufacturer
shall apply.
Note
Due to continuous research and development work,
we reserve the right to make changes to the techni-
cal content of this documentation.
13 EU Declaration of Conformity
Long reach sander Serial no.
LHS 225 EQ PLANEX 492236, 494828
Year of CE mark: 2007
We declare under sole responsibility that this prod-
uct complies with the following norms or norma-
tive documents: EN 60745-1, EN 60745-2-4, EN
55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3
in accordance with the regulations 2006/42/EC,
2004/108/EC, 2011/65/EU.
Dr. Martin Zimmer 18.12.2012
Head of Research, Development and Technical
Documentation
Festool Group GmbH & Co. KG
Wertstraße 20
D-73240 Wendlingen
REACH for Festool products, their accessories
and consumables
REACh is a European Chemical Directive that
came into effect in 2007. As “downstream users”
and product manufacturers, we are aware of our
duty to provide our customers with information.
We have set up the following website to keep you
updated with all the latest news and provide you
with information on all the materials used in our
existing products: www.festool.com/reach