Edimax Technology EW-7238RPD - Manual (Page 19)

19
1. Press and hold the WPS/Reset button on the wireless router/access point
for the correct length of time (check router/access point’s user manual) to
activate its WPS for 2.4GHz or 5GHz.
2 . Within two minutes, press and hold the WPS button on the extender for
two seconds to activate WPS. The WPS LED ( ) will flash slowly to indicate
WPS is activated (see LED Status).
3 . The devices will establish a connection. When a connection is successful,
the extender’s WPS LED ( ) will display on - and remain on for 5 minutes
(see I-3. LED Status ).
4 . Please wait for 5 minutes until the extender’s WPS LED ( ) is off, and
repeat this process to set up your dual-band extender’s additional second
Press for two
seconds