Ii-3, Resetting the wireless extender – Edimax Technology EW-7238RPD User Manual
Page 20
20
frequency band. In step 1 please activate WPS on your router/access point
for the alternate frequency 2.4GHz or 5GHz depending on which frequency
you previously set up.
Note:
Please check the instructions for your wireless
router/access point to confirm how long you need to
hold down its WPS button to activate WPS for 2.4GHz
or 5GHz. Some brands of router/access point may not
support WPS for 5Ghz – in this case, please use iQ
Setup instead.
II-3.
Resetting the Wireless Extender
If you experience problems with your Wi-Fi extender you can reset the
extender back to factory default settings. This resets all settings back to
default.
To reset the extender, press and hold the WPS/Reset button for 10 seconds
until the power LED (
) is flashing. The extender will re-initialize and the
power LED (
) will display on when the extender is ready (see