Edimax Technology BR-6428n - Manual (Page 134)

guaranteed speed for this rule), or Max (
Local IP Address Set the IP address range that will be affected by
this QoS rule. If only one IP address is involved,
input the IP address in left field only.
Local Port Range Set the port range that will activate this QoS
rule. If only one port is involved, input a single
number here (1 to 65535); if multiple ports are
involved, input starting / ending port number in
x‐y format (like 10‐20).
Remote IP Address Set remote IP addresses that will trigger this
QoS rule. If only one IP address is involved, input
the IP address in left field only.
Remote Port Range Set the port range that will activate this QoS
rule. If only one port is involved, input a single
number here (1 to 65535); if multiple ports are
involved, input starting / ending port number in
x‐y format (like 10‐20).
Traffic Type If you’re creating a QoS rule for a specific type
of traffic, you can select it from this menu and
you don’t have to input port range above.
Protocol Select the protocol type here (TCP or UDP).
Add Click ‘add’ button to add a new QoS rule
(detailed instructions will be given below).
Reset If you want to erase all values you just entered.
Click ‘Reset’
Edit If you want to modify the content of a specific
rule, please check the ‘select’ box of the rule you
want to edit, then click ‘Edit’ button. Only one
rule should be selected a time!
Delete Selected You can delete selected rules by clicking this