Edimax Technology BR-6428n - Manual (Page 163)

filtering table.
Reset Remove all inputted values.
All MAC address entries will be listed in this page:
To delete one or more entries listed here, please check the box of the mapping entry (under
‘Select’), and click ‘Delete Selected’ button.
If you wish to delete all mapping entries, click ‘Delete All’ button. To deselect all checked
boxes, click ‘Reset’ button.
If you wish to use IP address‐based filtering, please use ‘IP Filtering Table’ in this page:
Please check ‘Enable IP Filtering Table’ box first, and select ‘Deny’ or ‘Allow’ to decide the
behavior of IP filtering table (Deny the access of IP addresses in the list, or allow the access
of IP addresses in the list). You have to click ‘Add PC’ button to add a new IP address to the
list: