Edimax Technology BR-6428n - Manual (Page 144)

Internet IP address will be mapped to.
Type Select the type of connection, TCP or UDP. If
you’re not sure, please select ‘Both’.
Port Range Input the starting port number in the left field,
and input the ending port number in the right
field. If you only want to redirect a single port
number, just fill the port number in the left
field.
Comment Please input any text to describe this mapping,
up to 16 alphanumerical characters.
Add Add the mapping to port forwarding table.
Reset Remove all inputted values.
NOTE: Please note that every public IP address can be mapped to a single Client PC IP
address only.
All existing DMZ entries will be displayed in ‘Current DMZ Table’:
If you want to delete a specific DMZ entry, check the ‘select’ box of the DMZ entry you want
to delete, then click ‘Delete Selected’ button. (You can select more than one DMZ entries).
If you want to delete all DMZ entries listed here, please click ‘Delete All’ button or you can
also click ‘Reset’ button to unselect all DMZ entries.