Edimax Technology BR-6428n - Manual (Page 158)

3‐5‐5 Static Routing
In most cases, all your computers on local network will use default gateway (generally
provided by your ISP) to access servers on Internet. However, if you have preferred network
route you wish to redirect network traffic, you can use this function to create dedicated
route for specific network destination and bypass default gateway.
Most users will not require this function to access Internet.
Here are descriptions of every setup item:
Item Name Description
Enable Static Routing Enable static routing function.
Destination LAN IP Input destination network’s address here.
Subnet Mask Input the subnet mask of destination network
here.
Default Gateway Input the IP address of the gateway which
leads to this network here.
Hop Count Input the hop count (the distance between
destination network and this broadband