Edimax Technology HP-8501APg - Manual (Page 15)

14
3.4.1 Wireless Settings
Wireless Mode
You can select wireless operating mode here. Available options are: Auto (both 802.11b and 802.11g), 802.11b
only, 802.11g only, and Disable (Wireless disabled)
SSID
SSID is the short for ‘Service Set IDentifier’. Wireless devices use this identifier to identify which access point they
should connect. You can change SSID here, and all your wireless devices should set to the same SSID.
Channel
The radio channel number that wireless network uses. All your wireless devices should set to the same channel. If
you select ‘Auto’, Wireless Access Point will choose a channel automatically, and your wireless clients should set
channel to ‘Auto’ too. (In most cases, you don’t have to set wireless channel for your wireless clients, they will pick
a channel automatically).