Edimax Technology HP-8501APg - Manual (Page 36)

35
Figure 8: Privacy tab
The Set Local Device Only button is used to change the network name (network password) for local devices
only. After doing this, all the devices seen on the Main panel prior to this will no longer reachable or respond to
your command, as they will be located n a different logical network hereafter. Devices previously set up with the
same logical network (same network name) will appear in the device list afterward by selecting this option.
The Set All Devices button is used to change the logical network of all devices that appear on the Main panel.
The user must have entered the device's Password in order to set it to the new logical network. A notification
message will appear to report this operation is successfully completed.
4.4 The ‘Diagnostics’ Tab
The Diagnostics tab shows system information and a history of all devices seen. It will be something like Figure
9.
The upper panel shows technical data concerning software and hardware on the host computer used to
communicate over Powerline Ethernet Network. It shall include the following information: