Edimax Technology HP-8501APg User Manual
Page 27
26
‧Click Use the following IP Address and enter an IP Address that is on the same subnet of your Wireless
Access Point. Example: If the Wireless Access Point´s LAN IP Address is 192.168.2.1, make your IP
Address 192.168.2.X where the value of X is 2 to 99. Make sure that the number you choose is not in use
on the network.
‧Set the Default gateway to the IP Address of your Wireless Access Point (192.168.2.1).
‧Set the Primary DNS to the IP address of your Wireless Access Point (192.168.2.1).
‧The Secondary DNS is not required, or you can enter the IP address of the DNS server provided by your
ISP.
‧ Click OK once, then click OK again in next dialogue box. If you’re prompted to reboot your computer,
click Yes.
5. How can I assign a Static IP Address in Windows XP?
‧Click on Start > Control Panel > Network and Internet Connections > Network connections.
‧Please follow the instructions given in previous section (assigning a static IP address in Windows 2000)
and continue from there.