Edimax Technology HP-8501APg - Manual (Page 23)

22
‧Click Specify an IP Address.
‧Enter in an IP Address that is on the same subnet of your Wireless Access Point.
Example: If the Wireless Access Point’s LAN IP Address is 192.168.2.1, make your IP Address
192.168.2.X where X is a value between 2 to 99. Make sure that the number you choose is not in use on
the network.
‧Click Gateway tab.
‧ Enter the LAN IP Address of your Wireless Access Point here (192.168.2.1), then click ‘Add’.
‧ Click ‘OK’.