HONDA 2010 CR-V - Manual (Page 153)

If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons as previously described.
For information on AM/FM radio
frequencies and reception, see page
.
Each preset button can
store one frequency on AM and two
frequencies on FM.
Select the desired band, AM or
FM. You can store one frequency
on FM1, and one frequency on FM
2 with each preset button.
Use the tune, seek, or scan
function to tune the radio to a
desired station.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
, press the
A. SEL side of the bar. This restores
the presets you originally set. Press the left side of the
A. SEL/SCAN bar. You will see
A. SEL flashing in the display, and
the system goes into scan mode for
several seconds. It stores the
frequencies of six AM, and twelve
FM stations in the preset buttons.
You will see a ‘‘0’’ displayed after
pressing a preset button if auto
select cannot find a strong station for
every preset button.
Pick a preset button (1 6), and
hold it until you hear a beep.
If you are
traveling and can no longer receive
your preset stations, you can use the
auto select feature to find stations in
the local area.
1.
2.
3.
4.
250
To turn off auto select
Preset AUTO SELECT
Playing the AM/FM Radio (LX model)
Fe
a
tu
re
s
147
09/07/16 18:09:38 31SWA630_152